Fire stopping in Otley
Thick stone walls are good at stopping fire. The holes through them are not.
- Every seal labelled and photographed
- BM TRADA / FIRAS-certificated contractors
- Written price before any work
Otley sits in Wharfedale, about ten miles north west of Leeds. Much of the town centre is old stone: shops with flats above, pubs, chapels and mills turned into homes.
Stone walls hold fire well. The trouble is the holes through them.
Why holes in stone walls are awkward
A rubble stone wall can be 400mm or 500mm thick, and it is not solid all the way through. Behind the face there are smaller stones, lime mortar and sometimes voids.
So a hole drilled for a pipe can open into a void inside the wall. Sealing the face of the hole with a bead of mastic leaves a path round behind it.
Most fire stopping products are tested in concrete, blockwork or plasterboard. Few tests are done in rubble stone. The usual answer is to make the hole into something a tested detail can work with first: a sleeve set in mortar, or the hole made good with a suitable mortar, and then the seal fitted in that.
What turns up in these buildings
Cellar ceilings under shops, with timber joists and services going up to the flat.
Old chimney breasts used as service routes for new pipes.
Gaps round beams where a timber floor sits into the stone wall.
Plastic waste pipes through the wall from a kitchen or a bathroom added in the last few decades.
Listed buildings
If the building is listed, some work may need listed building consent. We do not decide that. If your building is listed, tell us, and check with the conservation officer before the work is agreed.
The work
Our BM TRADA / FIRAS-certificated contractors carry it out. Each seal gets a tag and photos. In a stone wall the record also notes the wall thickness and the method, so the next person knows what was done inside the hole.
Tell us the postcode, what the building is used for and how many floors it has. Photos of the gaps help a lot.